4.5in Toyota Suspension Lift Kit w/ N3 Struts (07-15 Tundra)
Unmatched ground clearance due to high clearance crossmember design. 100% precision laser cut materials used in latest computer aided design process. Levels the front with the rear of the vehicle Will work with factory 18-inch or larger wheels. No strut disassembly or strut compressor required for installation. Fabricated blocks are stronger and offer a longer lifespan than cast blocks. Requires no modification to the stock differential mounts, drivetrain or exhaust.
- Does NOT fit Pro Series models Does NOT fit Rock Warrior models Does NOT fit XSP-X models. Minor cutting and drilling is required. Requires 18-inch or larger wheels. Stock 18-inch or larger wheels can be used but can accommodate tires no wider than 11.5-inch. In some cases minor trimming may be needed to clear 35-inch tires. On vehicles equipped with a two piece driveshaft there is the potential for take off vibration, this can be corrected with SKU: 1776BOX1 carrier bearing shim kit. Please view instructions for complete information on proper tire / wheel combinations.
- Est. Install Time: 8-10 hours
- Front Component: Lifted knuckles N3 loaded struts Front crossmember Rear crossmember Steering stops Brake line brackets Differential drop brackets Bumpstop brackets Sway-bar brackets Lower skid plate Hardware
- Rear Component: Fabricated lift blocks U-bolts Brake line brackets Hardware